Ring LED display does not have a fixed design size standard, its size usually needs to be customized according to the actual application scenarios and customer needs, but in the design generally to consider the following aspects:

Diameter or circumference size
Application scenario decision: For example, in the mall atrium of the ring LED display screen, if you want to achieve a shocking visual effect and adapt to the atrium space, the diameter may be designed larger, generally more than 5 meters, or even ten meters; The circular decorative display used in small conference rooms or shops is relatively small in diameter, probably around 1-3 meters.

Viewing distance impact: if the viewing distance is far, such as in large stadiums or squares, in order to ensure that the audience can clearly see the screen content, the size of the ring LED display needs to be increased accordingly to improve the clarity and visibility of the image; On the contrary, if the viewing distance is close, such as in an indoor exhibition hall or a small activity place, the size can be appropriately reduced.

Pixel pitch
High-definition display needs: For places with high display quality requirements, such as TV studios, high-end conference rooms, etc., smaller pixel spacing is usually selected, such as P1.25, P1.53, P1.8, etc., to achieve a clearer and more delicate image and text display effect.

Cost and viewing distance considerations: In some places where the picture quality requirements are not particularly harsh and the viewing distance is relatively far, such as outdoor advertising Spaces, large shopping malls, etc., you can choose a larger pixel spacing, such as P2.5, P3, P4, etc., which can not only meet the basic display needs, but also reduce costs to a certain extent.

Module size
With pixel spacing: common module sizes are 320mm×160mm, 240mm×120mm, etc. Different pixel spacing will correspond to different module sizes. For example, the pixel pitch of P2.5, its module size is generally 240mm×120mm; P16 pixel pitch, module size may be 320mm×160mm.

Ring splicing flexibility: When designing a ring LED display, it is necessary to choose the appropriate module size so that it can be better spliced to form a complete ring. At the same time, module size also affects the ease of installation and maintenance of the display.

Display ratio
Common proportion choice: Although the ring display itself is a ring, it also needs to consider the proportion of its internal display area when designing. This can better fit the original proportion of most video and image content, avoid picture distortion, and improve the display effect.

Special requirements customization: According to the specific application needs, it can also be designed into other special display proportions, such as elliptical rings, irregular rings, etc., to meet specific creative or design requirements